Barrel tap | barrel valve JSY-306
Plastic faucet: JSY-306
Product features:
Plastic faucet/corrosive liquid faucet
1) Usage: Open and close the faucet by rotating the handle
2) Material: polyethylene、odorless、non-toxic、good low temperature resistance、resistant to most acid、alkali and solvent erosion
3) Can be locked: there is a padlock hole、can be locked to prevent misoperation、but the faucet itself does not contain the padlock、the padlock needs to be purchased separately
4) Seal: thread is not easy to damage、no drip; Contains EPDM (EPDM) O-type sealing ring; The tube body is in close contact with the rotating handle、without dripping
5) The drain nut can be connected to the level display tube、but the faucet itself is not equipped with the level display tube
6) Applicable: corrosive liquid with sulfuric acid concentration of less than 40%、high viscosity liquid
Attention:
1、not suitable for oxidizing acid packaging、such as: sulfuric acid、nitric acid; EPDM seals have poor stability in lipid and aromatic solvents (such as gasoline、benzene、etc.) and mineral oils、Which chemical liquids polyethylene is compatible with can not be listed one by one、When in actual use、please use the sample for trial experiment、and then use it after confirmation.
2、due to the differences in the production of iron drums according to different standards such as national standards、American standards、European standards、and Japanese standards、the tap thread is not necessarily matched with all 2-inch barrel mouth threads、If the polyethylene faucet is screwed on and dripping occurs or is not tight enough、it can be further sealed with raw material belt.
- Previous：Oil drum funnel JSY-304
- Next：Drum cap