Oil dispersing agent | Oil spill dispersant JSR-003
Oil spill dispersant
It is an efficient conventional oil spill dispersant. Its main function is that when there is oil spill in the water area, the oil spill dispersant can disperse the oil spill on the water surface into small particles, so that it can be dispersed into the water under the action of waves or external stirring force, so as to accelerate the process of microbial degradation of the oil spill in the water, so as to reduce pollution damage and eliminate oil spill pollution as soon as possible.
The amount of oil spill dispersant
1、The general dosage is 20% of the oil spill、which can be adjusted according to environmental conditions and oil types、but the dosage should not exceed 90%、and the stock liquid is sprayed.
2、with water gun water control oil fire、mixed in the water with 1-5% oil agent、can increase the fire extinguishing effect、shall not use the original liquid spray fire.
The use of oil spill dispersants
1、should be familiar with the State Oceanic Administration and the Ministry of Communications on the use of oil spill dispersant regulations
2、Simple test should be done on site before use、Make sure that the oil spill under site conditions can be dispersed by dispersant before spraying
3、as far as possible to use the oil collector adsorption material、recovery and adsorption of oil spill、reduce the thickness of the oil film、and then use the oil spill dispersant
Appearance: clear and transparent、not layered
PH: 7-7.5
Ignition point (℃) : >70
Viscosity (30℃)(mm2/s) : <50
Floatation rate (%) :>20
Biodegradation BOD5/COD(%) :>30