Nuclear pollution remover

Nuclear pollution curing detergent
Overview: Mainly using molecular complexation curing locking technology、all kinds of radionuclides and other pollutants that do not belong to the surface of the object itself are covered、and gradually harden around them、and finally form a complete gel layer that can be spelled.
Physical and chemical properties: blue transparent viscous liquid、PH: 6-7.
Usage: Spray or pour this product on the surface of nuclear contaminated objects、then evenly spread it with a brush、and place it for a period of time (depending on environmental temperature、humidity and coating thickness and other factors、it takes several hours to ten hours、it can also be air-dried to speed up film formation)、After drying、peel the film from the surface of pollutants.
Technical indicators:
1、the coating rate is 0.6-2.5㎡/L、the cleaning clearance rate can reach 100、compared with the rag wiping method、the amount of waste generated is only 1/3 of it.
2、the treatment of horizontal vertical plane、through the penetration effect can be cracks、holes in the pollution elimination.
3、non-toxic、non-corrosive、no odor、non-combustible and non-explosive.
4、easy to use、direct use、field treatment to form a solid film、easy to peel.
Scope of application: For nuclear terrorism、nuclear accidents、nuclear power plants、radiological medical laboratory radioactive contaminated surface (cement、aluminum、iron、rubber、resin、plastic、wood、tile、marble、ceramic、floor leather and other plane、vertical plane) decontamination、Nuclear accident sites、nuclear power plants、nuclear facilities、military nuclear-powered ships and aircraft carriers、nuclear medicine departments in hospitals、toxic industrial chemicals (mercury、PCB、acid、lead、asbestos、etc.) and biohazardous environments.

All-purpose skin remover for nuclear contamination
Overview: On the basis of the advanced nuclear pollution decontamination agent formulation、more active nuclide trapping molecules are added to remove a variety of radionuclides、Its excellent decontamination effect captures the nuclides quickly and efficiently through chelation and solvation、and then removes them by suspension.
Physical and chemical properties: colorless transparent liquid、miscible with water in any proportion、No toxic odor、no burning、no harm to human body and equipment、no chlorine、sulfur、organic solvents and nuclear power plant prohibited chemical elements.
Usage: When the local skin is contaminated by radionuclides、immediately open the bottle cap、press the nozzle and apply the solution to the contaminated area for 2-3 minutes、repeat 2-3 times、and then clean it with water.
1、efficiency broad spectrum、including efficiency nuclear pollution scrubber and skin protective agent、complexing agent、can quickly and thoroughly remove nuclear pollutants、It also has a certain removal effect on dangerous corrosive chemicals.
2、suitable for all kinds of radionuclide pollution decontamination、with broad spectrum、non-alkaline、non-corrosive、biodegradable characteristics、can be used for the treatment of unidentified radionuclide pollution.

Nuclear decontamination agent (iodine radiation)
Overview: Nuclear decontamination agent (type Iodine-131) is a new type of nuclear decontamination agent specially developed for radioactive iodine decontamination、It has the following characteristics:
1、the hospital I-131 treatment room decontamination agent、after the patient leaves、the use of this product can make the treatment room quickly return to the background level、without waiting for natural attenuation.
2、can be applied to any contaminated surface、no irritation、can be used for complete skin surface decontamination.
3、a single application、can eliminate nearly 100 all pollution.
4、Clear nuclide types :I-131、I-125、I-123、F-18、etc.
Ingredients: Patented ingredients.
Properties: aqueous liquid.
Elimination principle: The active ingredients of the decontamination agent quickly capture specific nuclides such as I-131 and lock them firmly.
How to use:
1) Shake the detergent well.
2) Pour the detergent onto the contaminated surface and leave it on for 30 seconds.
3) Wipe off the detergent with toilet paper.
4) The contaminated surface is clean as before.